UA-150465343-1

Awning Motors Manufacturers Introduces How To Extend The Service Life Of Tubular Motors


Awning Motors Manufacturers introduced that the service life of tubular motors is measured by the number of times the motor runs,

.

Awning Motors Manufacturers introduced that the service life of tubular motors is measured by the number of times the motor runs, in hours under normal conditions. The higher the frequency of use, the earlier it will break.

The service life depends on many components, mainly the circuit parts, coils, capacitors, resistors, etc., which will burn if the current is large, and will burn even after years of normal use. Rotating mechanisms, gears, especially plastic and nylon gears are easy to break. The iron gear is better.

Abnormal noise can be divided into excessive current. It may be that the friction of the entire mechanism is increased, stuck, and requires a large current to work, or it may have poor contact and spark operation. Abnormal sound of mechanical collision and friction. It may be that there is a lack of lubricating oil, or the position of the mechanical structure is not accurate and collide with each other.

Through the above introduction, Alexa Controlled Blinds Manufacturers hopes that you can simply refer to the content of this article in future use.

61 Views

Comments